Lift Station No. 1 The work includes but is not limited to cleaning the wet well t-lock liner; demolition and replacement of all wet well piping and fittings, including protective coatings; demolition and replacement of all valve vault piping, valves, and supports, including protective coatings; installation of a permanent bypass connection on the 6-inch (6") force main; exterior wet well concrete repair; installation of a precast step; demolition and replacement of the existing control panel, including new control panel steel platform; installation of terminal boxes; installation of support rack for the existing ATS; installation of new service feeder conduit and wire; demolition and replacement of existing floats and transducer; and all other conduit and wire; site restoration; bypass pumping; SWPPP implementation, maintenance, and record keeping; and all else as shown on the construction drawings and detailed in the specifications for a fully functioning lift station. The project is located in Fort Bend Couty Municipal Utility District No. 41. Lift Station No. 1 is located at 16555 Beewood Glen, Sugar Land, TX, 77498. The Wastewater Treatment Plant Lift Station is located at 16902 Benwick Dr., Sugar Land, TX, 77489 WWTP Lift Station All questions shall be submitted to the Engineer via online The work includes but is not limited to cleaning the wet well t-lock liner; blasting the onsite manhole walls and floor; application of one-inch (1") of concrete repair mortar to all areas of the onsite manhole walls and floor; application of a 100% solids epoxy coating system to the onsite manhole walls and floor; demolition and replacement of the force main piping inside the onsite manhole, including protective coatings; demolition and replacement of all wet well piping and fittings, including protective coatings; blasting and recoating above ground piping, valves, and transducer handhole cover; installation of a doghouse manhole on the influent 21-inch (21") sanitary sewer pipe northeast of the existing onsite manhole; demolition and replacement of the corroded wet well vent bend, screen, and flange, including blasting and recoating the vent; site restoration; bypass pumping; SWPPP implementation, maintenance, and record keeping; and all else as shown on the construction drawings and detailed in the specifications for a fully functioning lift station. Estimate: $565,000