The Work consists of performing or providing all labor, services, and documentation necessary to produce such construction and furnishing, installing, and incorporating all materials and equipment into such construction, all as required by the Contract Documents. The Work generally includes but is not limited to the construction of a new 4.42-acre gravel parking lot with a new 4,800 square-foot pre-engineered metal maintenance building, fueling station, modular office, wash pad, and utility service connections as further described below. Parking Lot and Site Improvements The parking lot will be constructed of Type 2 aggregate base course with a concrete driveway approach, concrete slabs and foundations for the maintenance building, fueling station, aggregate pad for the modular office, and associated utility services. The parking lot will also include perimeter detention basins, site lighting, and concrete curb islands with electrical service for battery warmer hook-ups. A manual cantilever rolling gate will be retro-fitted into the existing fence at the proposed driveway. Bus Maintenance Building the Contractor will be responsible for procurement and construction of a pre-engineered metal building and associated concrete foundation, floor slab, three automatic overhead doors, lighting, mechanical HVAC system, electrical service, and plumbing as indicated on the Drawings. Structural design plans and specifications for the metal bus barn building, conforming to the performance specifications provided in the Drawings, will need to be supplied by the Contactor's supplier for Building Department review before a Building Permit will be issued. Modular office the modular office will be procured by LCSD, delivered to the site by others, and installed on a gravel pad prepared by the Contractor. Modular office installation will include connecting proposed domestic water, sewer, and electrical services as shown on the Drawings. Bid security shall be furnished in accordance with Section 00200, Instructions to Bidders. Each Bid must be submitted on the prescribed form (separate Bid package) and accompanied by a certified check or Bid Bond in accordance with Section 00200. Successful Bidders will be required to furnish both a Payment Bond and Performance Bond in the full amount of the contact price. The Owner will not award the Contract to a Bidder who, at the time of submitting a Bid, was not properly licensed under the provisions of Chapter 624 of NRS or if the Contract would exceed the limit of the Bidder's license. Bidders shall submit proof of qualifications to perform the Work as described in the Instructions to Bidders. All questions about the meaning or intent of the Bidding Documents are to be submitted to Engineer in writing. Interpretations or clarifications considered necessary by Engineer in response to such questions will be issued by Addenda. Questions received less than seven days prior to the date for opening of Bids may not be answered. Only questions answered by Addenda will be binding. Oral and other interpretations or clarifications will be without legal effect.