This Request for Proposals is an invitation by the St James Assiniboia School Divison to prospective proponents to submit proposals for Lincoln Middle School New Elevator, Lifts and Barrier Free Upgrades in Winnipeg, Manitoba. 1comply With the Requirements of This Section When Performing the Following Work, as Outlined in Section 02 82 00 - Asbestos Abatement - Summary of Work, and to Confirm Locations and Approximate Quantities of Asbestos Materials. .1 Remove and Dispose of Asbestos-containing Caulking Applied Between the Building and the Frame of the Interior Storefront in the Northwest Entrance. .2 Remove and Dispose of Asbestos-containing Vinyl Floor Tiles Located in Room 11 as Needed to Facilitate New Installations. .3 the Scope of Work is to Include, but Not Be Limited to, Materials Identified During the Site Walkthrough, Summary of Work, Architectural Drawings, and as Directed by the Owner or Consultant. .4 the Contractor is Responsible for All Final Quantity Determinations. .5 All Work Will Be Subject to Visual Inspection Inside and Outside the Asbestos Work Area(S) by the Environmental Consultant. Any Contamination of the Surrounding Areas, Indicated by Visual Inspection, Shall Necessitate Complete Cleanup of Affected Areas by the Contractor, at No Cost to the Owner. The Contractor Recognizes That Time is of the Essence in Remedying Any Noted Contamination or Other Deficiencies. .6 the Contractor Shall Ensure That Supervisory Personnel, That Has Successfully Undergone a Minimum Three-day Asbestos Abatement Course Approved by Manitoba Workplace Health and Safety, is Present on Site During All Removal Activities. 7 the Contractor Shall Ensure That All Abatement Personnel Have Successfully Undergone a Minimum Two-day Asbestos Abatement Course Approved by Manitoba Workplace Health and Safety. 8 the Contractor Must Notify the Manitoba Department of Workplace Safety and Health 5-days Prior to Commencement of Contaminated Work. 9 the Contractor Must Notify the Environmental Consultant 24-hours Prior to Requiring a Final Visual Inspection for All Type 1 Work Areas. .10 the Contractor Will Be Responsible for All Costs Incurred for the Completion of Additional Final Visual Inspections or Air Clearance Monitoring, if Requested, if the First Inspection or Air Clearance Tests Fail. Question Acceptance Deadline: 2023/11/01 04:00:00 PM CDT Official bid documents must be obtained from www.merx.com and bid submissions must be done through the Merx platform.