Proposals must be submitted on the forms provided and in a sealed envelope plainly marked "Bid Middlebury Road Reclamation and Drainage Bid". To receive consideration bids must be in the hands of the Purchasing Agent or his authorized representative no later than the day and hour mentioned above. The Purchasing Agent reserves the right to accept or reject any or all bids; to waive any informality; or to accept any bid deemed in the best interests of the Town of Watertown. The Town of Watertown reserves the right to take into account the residency of bidders within the Town of Watertown and/or the location of the bidder's business within the Town of Watertown in awarding this bid. All bids will be considered valid for a period of sixty (60) days. Bidders shall: o Provide a list of equipment available for the project o Provide a list of references for work performed over the last five years in the State of Connecticut o OSHA 10 Certificates for all contractor employees working on-site Project Description: This project consists of the provision of approximately 2 catch basins, 475 linear feet (LF) of 15" HDPE PIPE (HDPE PIPE), and 80' LF of 8" perforated PVC PIPE between 870 and 920 Middlebury Road, Reclamation of Middlebury Road, from Route 6 to Bunker hill Road curb (BCLC) and incidental related work on Middlebury Road in Watertown, Connecticut. TECHNICAL SPECIFICATIONS This project consists of provision or extension of the storm water drainage system on Middlebury Road in Watertown, Connecticut in accordance with the project plans and specifications. All work is to be performed in accordance with the State of Connecticut Department of Transportation "Standard Specifications for Roads, Bridges and Incidental Construction, Form 818", as supplemented and as amended below. However, it should be noted that reference to the Form of 818 is for convenience only and is not meant to imply or to infer that this project is an 818 project or that all of the terms and conditions of the Form 818 apply. Mobilization, demobilization, handling water, dust control, dewatering, saw cutting, tack coating, utility protection and construction staking will not be bid separately, but the price of such work as may be required shall be included in the unit price bid for the work. It is the sole responsibility of the contractor to provide, arrange for and coordinate any utility support, protection or relocations required for this project. *The list of planholders and/or interested bidders is not being tracked by the stakeholders involved with this project. If you are an interested contractor and wish to be listed as a bidder, please notify our editorial staff at addtobidlist@constructconnect.com.