All questions about the meaning or intent of the Bidding Documents are to be submitted to Engineer in writing. Interpretations or clarifications considered necessary by Engineer in response to such questions will be issued by Addenda delivered to all parties recorded as having received the Bidding Documents. Questions received less than seven days prior to the date for opening of Bids may not be answered. Only questions answered by Addenda will be binding. Oral and other interpretations or clarifications will be without legal effect. Scope of Work: This project shall be identified in the Plans and Specifications. In the event of a conflict between this specification and project plans (drawings) then the plans will take precedence. Shop Drawings: The Contractor shall furnish drawings, schematics, data, etc., on materials and equipment for approval by the Engineers prior to purchase, fabrication or shipment. Sufficient sets shall be furnished to provide four (4) sets for the Engineer, one (1) set for the Owner and one (1) set for approval for a total of six (6) sets. Additional sets shall be furnished as required by the Contractor. Site Investigation: The information contained in these Contract Documents in regard to original topography, subsurface soils, subsurface structures, subsurface utilities, and any quantities based thereon, is furnished solely for the convenience of the Contractor. The completeness and accuracy of this information is not guaranteed and its use in no way relieves the Contractor or others of any responsibility for loss due to inaccuracies or deviations there from which may be encountered. For the purposes of this project, it is stipulated, and Contractor agrees to stipulate, that Contractor shall discover and shall be aware of all water utility facilities, all sanitary sewer facilities, all storm sewer facilities, all gas utility facilities, all telephone utility facilities, all electric utility facilities, and all other subsurface pipelines and utilities that may impede Contractors work whether shown or indicated or not shown or not indicated by these Contract Documents, that the Contractor has considered the presence of such utilities in preparing his bid and negotiating the contract amount, and that the discovery of such utilities shall not be cause for additional compensation to the Contractor. Specifications: Titles to divisions and paragraphs in these Contract Documents are introduced for convenience and are not to be taken as a correct or complete segregation of the several units of material and labor. No responsibility, either direct or implied, is assumed by the Engineer for omissions or duplications by the Contractor or his subcontractors, due to real or alleged error in arrangement of matter in these Contract Documents.