To have contractor to provide all labor, equipment, materials, supplies, insurance, etc necessary to install new electrical outlet receptacles and support poles with connections back to an existing service panel. SBR vendors are encouraged to respond. The Project Classification for this solicitation is: Under $50,000 If you have any questions regarding this solicitation, contact the Procurement Officer, Perry Otwell at 410-260-8911 or by email to: Perry.Otwell@Maryland.gov If the work is not completed within the time period specified, the contractor will be liable for liquidated damages of $150.00 per calendar day as specified in the "General Conditions". If the State of Maryland or other regulatory body requires a license or certificate to perform the services required, please provide the copy of license number and date of issuance in submission with other required documentation. A copy must be mailed or faxed. Question Deadline 10/23/2023 at 2:00 PM ET 1. This project consists of the Contractor providing all labor, equipment, materials, supplies, insurance, etc. necessary to install a new electrical outlet receptacles & support poles with connections back to an existing service panel. Site is located at Manning Hatchery located at 10201 Bee Oak Road, Cedarville State Forest, Brandywine, Prince George's County, MD 20613. 2. The project shall include, but is not limited to the following: a. Supply and install new electric power panel #1 for total of four (4) GFCI protected receptacles outlets, two at 120V and two at 250V. Location of panel to be between ponds between pond 14 & 15. (Approximately 400LF) b. Supply and install new electric power panel #2 for total of four (4) GFCI protected receptacles outlets, two at 120V and two at 250V . Location of panel to be between ponds between pond 25 & 27. (Approximately 300LF) c. Supply and install new electric power panel #3 for total of four (4) GFCI protected receptacles outlets two at 120V and two at 250V, . Location of panel to be between ponds between pond 28 & 29. (Approximately 2700 LF) d. Connect new power panels to the main breaker panel in the shop or the in the office as open breaker spaces are available. e. Test electrical system for proper operation by a third party electrical inspection.