SC File NO(S).: 5770230 PCN: P043508 Project No.: P043508 PCN: P043511 Project No.: P043511 PCN: P043513 Project No.: P043513 PCN: P043514 Project No.: P043514 PCN: P043517 Project No.: P043517 PCN: P043544 Project No.: P043544 PCN: P043545 Project No.: P043545 PCN: P043547 Project No.: P043547 PCN: P043550 Project No.: P043550 PCN: P043555 Project No.: P043555 PCN: P043556 Project No.: P043556 PCN: P043557 Project No.: P043557 PCN: P043587 Project No.: P043587 PCN: P043588 Project No.: P043588 PCN: P043589 Project No.: P043589 DBE Goal Percent: 0.00 % Approx. Length (miles): 117.4300 CO(S).: Allendale Bamberg Calhoun Clarendon Hampton Completion Date: 7/31/2025 Days The Contractor's attention is called to the requirements of the SC Department of Transportation for Prequalification. Only contractors who have been issued a prequalification certificate by the sc department of transportation will be allowed to submit bids. Information concerning prequalification can be obtained at the Contracts Administration office, Room 332 in the Headquarters building, 955 Park Street, Columbia, SC, or by contacting Maria Devito at (803)737-2043 or Prequal@scdot.org. Unless otherwise indicated in the advertisement, no proposal will be considered unless accompanied by a bid bond in the amount of 5% of the Approximate bid amount, written by a surety satisfactory to the Department, properly executed in South Carolina Department of Transportation Form 674 (furnished by the Department in each proposal). If an Electronic Bond is Utilized, The Bond Id Number Must Be Provided on the Surety 2000 or Tinubu (Surepath) Network Electronic Bond Form. No Other Form of Proposal Guaranty Will Be Accepted. Visitors are welcome and should sign in at the Park Street entrance. Please contact the Contract Administration Office at (803)737-1750 with all Letting related questions. The south Carolina department of transportation reserves the right to reject any or all proposals and waive any technicalities. SC DOT - 170 - 2025 Clarendon Reclamation - Resurfacing Furnish all required labor, equipment, and materials and perform all operations necessary for installing anchors and dowels in concrete using an adhesive bonding system in accordance with the details shown on the Plans and with the requirements of this Specification. Provide a material system specifically intended for use in structural applications for bonding anchors and dowels to hardened concrete. Limit applications to anchors and dowels installed in horizontal, vertical, and downwardly inclined positions. Do not use adhesive anchors in overhead or upwardly inclined installations.