A. Base Bid at all roof areas except Upper High Center Roof Area: Remove entire roof system down to existing structural metal deck. Install 60 mil single-ply reinforced polyvinyl chloride (PVC) KEE fleecebacked sheet membrane fully adhered to coverboard. 1/2" isogard hd coverboard mechanically attached over 5" polyisocyanurate rigid insulation board over vapor barrier over existing structural metal deck. Install new cap/coping flashings and other components as indicated on the Drawings. Provide roofing membrane, base flashings and component materials that comply with requirements in FMG 4450 and FMG 4470 as part of a membrane roofing system and that are listed in FMG's "Approval Guide" for Class 1 or noncombustible construction, as applicable. Identify materials with FMG markings. 1) Fire/Windstorm Classification: Class 1A roof designed and installed to 100 mph wind speed; manufacturer to calculate appropriate uplift requirements based on 100 mph wind speed. 2) Hail Resistance: SH B. Base Bid at Upper High Center Roof Area: Remove existing PVC membrane, slip sheet and fanfold insulation board. Install 60 mil single-ply reinforced polyvinyl chloride (PVC) KEE fleece-backed sheet membrane fully adhered to 1/2" fanfold rigid insulation board mechanically attached over vapor barrier through existing roof system to structural metal deck. Provide associated components as indicated on the Drawings. Provide roofing membrane, base flashings and component materials that comply with requirements in FMG 4450 and FMG 4470 as part of a membrane roofing system and that are listed in FMG's "Approval Guide" for Class 1 or noncombustible construction, as applicable. Identify materials with FMG markings. 1) Fire/Windstorm Classification: Class 1A roof designed and installed to 100 mph wind speed; manufacturer to calculate appropriate uplift requirements based on 100 mph wind speed. 2) Hail Resistance: SH Questions concerning the Instructions to Bidders, Form of Contract, Insurances and Bonds shall be addressed to the Office of Procurement and Contracts, Department of Administration, Suite 451S, 900 S.W. Jackson Street, Topeka, Kansas 66612, telephone (785) 296-0002. Questions concerning the Construction Contract Documents (Drawings and Specifications) shall be addressed to the Design Team at: CHARLES A. RENZ, ARCHITECT JONES GILLAM RENZ ARCHITECTS 730 N 9TH STREET SALINA, KANSAS 67401 PHONE: 785-827-0386 E-MAIL ADDRESS: crenz@jgrarchitects.com Question Deadline 09/13/2024