Service Start: 10/25/2023 Service End: 8/1/2024 A five-percent (5%) Bid Bond, certified check, or cashier's check is required with bid proposals of $50,000.00 or more. Contractor Questions: All questions related to the project shall be submitted via e-mail to the Project Manager, Paul Barker, Project Manager at paul.barker@state.co.us. The deadline for questions is October 25, 2023 at 4:00 pm. Questions submitted after the deadline will not be addressed. All questions and answers will be posted as solicitation amendments on the Vendor Self Service (VSS) website. Bidders may not automatically be notified of the existence of a modification or addendum. It is the responsibility of the bidder to check the VSS website periodically to see if any modifications have been issued. Failure to retrieve such modifications and include their provisions in your bid response may result in your bid being deemed non-responsive. NOTICE OF AWARD November 15, 2023 NOTICE TO PROCEED December 11, 2023 (Tentative) SUBSTANTIAL COMPLETION July 31, 2024 (Tentative) The Project consists of the construction of (4) new buildings totally approximately 10,000 SF. 1. Briefly and without force and effect upon the Contract Documents, the Work of this single prime Contract can be summarized as follows: 2. Work under this Contract includes: a. Sitework: 1) Site utilities: Water mains, storm sewers, sanitary sewers. 2) Rough and finish grading, paving, concrete sidewalks and plazas, ground cover, trees and shrubs. 3) Fencing, site equipment and miscellaneous site improvements. b. Building Structure: 1) Concrete footings. concrete foundation walls, concrete slabs on grade, steel framing, insulated steel stud exterior bearing wall systems, and miscellaneous metal items. c. Building Enclosure: 1) Exterior wall systems of cavity wall insulation, and metal panels. 2) Aluminum windows, storefront entrance systems and glazing. Galvanized hollow metal doors and frames. 3) Roofing systems of pre-finished metal roofing. d. Interior Finishes: 1) Insulated gypsum board/metal stud partitions 2) Floor finishes of carpet, LVT, porcelain tile 3) Wall finishes of paint, porcelain tile. 4) Ceiling finishes of acoustical lay-in tile, gypsum board, gypsum board soffits. 5) Plastic laminate casework, HM doors and frames, wood doors, access panels, hardware, glazing, acoustic treatment, lockers, toilet accessories, markerboards e. Mechanical Systems: 1) Plumbing including, supply and waste piping systems, piping insulation, plumbing fixtures. 2) Heating including piping, piping insulation, water heater, furnaces. 3) Ventilation to include, air handlers, unit ventilators, fan coils, ductwork, duct insulation, chilled water piping. 4) Temperature control system. f. Electrical Systems: 1) Electrical service, distribution panels, conduit and wiring. 2) Interior lighting. 3) Low voltage work. 4) Fire alarm