The Complexity Factor for this project is 0. This project requires 23% DBE participation, or if the contract goal is not met, documented evidence of good faith efforts. Phase I/II engineering services are required for various projects in District Five. Phase I work may consist of conducting hydraulic and route surveys, subsurface utility engineering, preparing Structure Geotechnical Reports, drilling and analysis of soil borings, hydraulic analysis, geometric studies, and preparing project reports (Categorical Exclusion reports only). This work may include data collection, development of alignment alternatives, cost estimates, traffic management analysis, traffic management plans, crash analysis, quantity computations, and other related work items required to produce a project report. Phase II work may consist of conducting route surveys, land surveys, right-of-way plat and plan preparation, writing legal descriptions, staking right-of-way, hydraulic analysis, geometric studies, roadway plans, highway lighting, traffic signal design, TS&L drawings, pre-final structure plans, final structure plans, and any related work required to complete final plans, special provisions, estimates, and 3D model as necessary. In addition, the Consultant may be required to provide project management and/or project support staff in the District Five office and/or via a remote connection. The Consultant will be expected to perform the job duties of an IDOT Project Manager and/or Team Member. The work may include engineering, technical management, public coordination, administrative services, and other work as necessary to ensure assigned projects are completed in accordance with established schedules and budgets. The Consultant may be required to assist in reviewing, overseeing, tracking, and prioritizing projects being performed by IDOT personnel and other Consultants. The amount of work performed while assigned to the district office will be dependent on district needs and staffing levels. Questions concerning this Bulletin should be directed to: E-mail: DOT.ConsultantServices@illinois.gov Or mailing address: Bureau of Design and Environment 2300 South Dirksen Parkway Attn: Consultant Unit Room 330 Springfield, IL 62764 The Prime firm must be prequalified in the following categories to be considered for this project: Highways (Roads and Streets) Location Design Studies (Rehabilitation) Structures (Highway: Typical) Statements of Interest, including resumes of only the key people noted above, must be submitted electronically to the Central Bureau of Design and Environment through the Engineering Prequalification and Agreement System (EPAS) The method of contractor selection has not been determined at this time. IDOT - 028 - RFP - Various Phase I/II Projects, Various Routes, Various Counties, Region Three/District Five