PROJECT DESCRIPTION A. The purpose of this project is to install new valves at and around Pump Station 4 to allow for the isolation of the Pump Station ahead of other projects that will require a temporary shutdown of Pump Station 4. B. Major work items are: (1) Perform 8 linestops on large water lines (24-46.6 inch diameter) to temporarily shut off water flowing into Pump Station 4 in order to allow for multiple new valves and vaults to be installed. (2) Install a number of large valves in and around Pump Station 4 ranging from 24-42 inches in diameter which will allow for the isolation of Pump Station 4 for future projects and maintenance. (3) Replace a broken 36" gate valve near the intersection of 2nd Street and Avenue L. C. The Contractor shall furnish all labor, equipment, and materials required for the complete construction of the work as shown on the drawings and specified herein. D. All work shall be performed in accordance with the most recent City of Lubbock Design Standards for Water and Sanitary Sewer construction. 1.4 Work shall also include restoration or replacement of all removed or damaged pavement, curb, sidewalk, gutter, shrubbery, fence, sod or other disturbed surfaces or structures in a condition equal to that before the work began to the satisfaction of the Engineer. The City of Lubbock is requesting proposals for the Pump Station 4 Large Valve Replacement. The successful offeror will be required to furnish a performance bond in accordance with Chapter 2253, Government Code, in the amount of 100% payment bond in accordance with Chapter 2253, Government Code, in the amount of 100%f the City of Lubbock in an amount not less than 5% submit a cashier's or certified check All requests for additional information or clarification must be submitted in writing and directed to: Kiara Morgan City of Lubbock Purchasing and Contracts Management Office 1314 Ave K, Floor 9 Lubbock, Texas 79401 Questions may be emailed to Kmorgan@mylubbock.us Question Deadline 08/18/2023 at 3:00 PM CT